Skip to content
dialtone

DT1 / Datasheet / Rev. C

Dialtone One, in numbers.

Everything we know about it today. Numbers are from our third prototype run and may change by a few percent before Batch 01.

01

Dimensions

DT1 · General arrangementmm · 412 g · Rev. C
Diameter
68 mm
Height
41 mm
Weight
412 g
Cap
24 mm, 24 detents per turn
Light ring
4 mm band, 36 LEDs
Display
1.5-inch e-ink, 27 × 27 mm
Base
13 mm steel with rubber foot
Finishes
Aluminum, Graphite, Signal Orange
02

Materials

Cap
6061 aluminum, straight knurl, anodized
Top
Hardened glass over a 1.5-inch e-ink panel
Light ring
Frosted polycarbonate diffuser, 36 LEDs
Base
Zinc-plated steel, 260 g
Foot
Natural rubber, replaceable
Screws
5 × Torx T6, stainless steel

Parts, top to bottom

  1. DT1-101E-ink label
  2. DT1-102Knurled aluminum cap
  3. DT1-103Magnetic detent ring
  4. DT1-104LED ring
  5. DT1-105Main board
  6. DT1-1061,200 mAh battery
  7. DT1-107Weighted steel base
03

Connectivity

Wired
USB-C, USB 2.0 full speed
Wireless
Bluetooth 5.3 Low Energy
Pairing
Up to 3 computers, switch with a long press
Without the app
Volume and play/pause as a standard HID device
Range
About 10 m indoors
04

Battery

Capacity
1,200 mAh
Cell
Lithium-ion polymer, 3.7 V
Life
About 3 weeks per chargeTwo hours of turning a day, Bluetooth, LEDs at 50%.
Charging
USB-C, 0 to 80% in about 45 minutes
Replacing
Plug-in connector, held by two of the five screws
05

Compatibility

What works on each operating system
FeaturemacOSWindowsLinux
Companion appmacOS 13 or laterWindows 10 or laterUbuntu 22.04, Fedora 39, AppImage
Volume and playbackYesYesYes
Focus timerYesYesYes
Lights (Matter, Home Assistant)YesYesYes
App shortcutsYesYesX11 and Wayland
Works with no app installedVolume, play/pauseVolume, play/pauseVolume, play/pause
Bluetooth 5.3YesYesBlueZ 5.66 or later
06

In the box

  1. 01Dialtone OneIn the finish you choose
  2. 02USB-C to USB-C cable1 m, braided
  3. 03Torx T6 driverFits all five screws
  4. 04Quick-start cardPrinted on recycled board

Warranty: 2 years. Two-year warranty on every part. After that, spare caps, batteries, feet, and boards are sold at cost for at least 7 years.

07

Questions

When will my Dialtone ship?

We build in batches of 500 and ship them in the order reservations came in. Batch 1 ships in March 2027, and each batch after that ships about a month later. Your reservation number and batch are shown as soon as you reserve.

Do I pay anything to reserve?

No. Reserving is free and takes your email, country, and finish. When your batch is ready we ask you to confirm and pay. If you change your mind, ignore that message and your spot goes to the next person.

Can I change my finish after reserving?

Yes. Before your batch ships we ask you to confirm everything, including the finish. Changing it keeps your place in line.

Does it need an app?

Out of the box it works as a standard volume knob with play and pause, no install needed. The free companion app adds the focus timer, lights, app shortcuts, and lets you choose what each turn and press does.

Which computers does it work with?

macOS 13 or later, Windows 10 or later, and current Linux desktops (Ubuntu 22.04, Fedora 39, or anything that runs an AppImage). It connects over USB-C or Bluetooth 5.3.

How long does the battery last, and can I replace it?

About three weeks per charge with normal use. The battery sits on a plug-in connector under five Torx screws, and the driver is in the box. Replacement batteries will be sold at cost.

Can it control my lights?

Yes, through the companion app. It works with lights on Matter and with Home Assistant. Turn to dim, press to switch on or off.

Can I use it with more than one computer?

It remembers up to three computers. Hold the dial down for two seconds to move to the next one; the e-ink label shows which one is active.

Where do you ship?

The countries in the reservation form: most of Europe, the United States, Canada, Australia, New Zealand, Japan, South Korea, Singapore, Hong Kong, and Taiwan. Prices include import duties everywhere we ship.

What does the warranty cover?

Two years on every part, from the knurled cap to the rubber foot. After that we keep selling spare parts at cost for at least seven years, with repair guides for each one.